BASIC OPERATION
●Basic copying procedure
1 | 2 |
1. Turn the main switch ON ( ❘ ).
2. Warm-up
At the end of
*Set originals and press the Start key while the copier is still warming up. Copying will begin as soon as
*When using job build functions (page 108) or job reservation functions (page 103),
5
5. Setting the paper size
When “APS” appears, paper of the same size as the original is automatically selected. To copy the original’s image onto a different size of paper, without changing the size of the image, touch the paper size key for the desired size of paper, and press the manual key. To make copies of the same size as the originals with images of the same size, no special settings are required.
6. Copy exposure adjustment
In the initial mode, the exposure scale is displayed on the touch panel, and the manual exposure mode is set. Exposure can be adjusted with the copy exposure adjustment key (“Darker” key or “Lighter” key). By moving the cursor on the exposure indicator to the right, copies become darker and by moving it to the left, copies become lighter. The exposure scale displayed on the basic screen consists of 7 and 13 levels, but if the key is further continuously touched, the copy exposure can be adjusted in 13 and 25 levels.
*When the overall copy is too dark/light, exposure will be adjusted. (page 142, “5 Manual exposure adjustment”)
*The exposure adjustment level can be selected from 7 or 13 levels. (page 141, “2 Exposure steps”)
7
8
7. Setting the number of copies
Use the numeric keys to enter the desired number of copies. The entered number will appear in the copy number display on the touch panel. Up to 999 copies can be set.
*It is possible to lower the limit on the number of copies that can be set. (page 144, “@ Copy limit: with # keys”)
8. Starting copying
Press the Start key. If “Ready to copy.” is displayed on the touch panel, copying will be possible.
41
