Kyocera 4230, 5230 manual 148, 151, 152, 153, 154

●How to finish the copy default setting

1.When finishing each setting, touch the "End" key for the copy default setting screen.

The display will return to the management mode selection screen.

●Comment terminer le réglage initial de la copie

1.A la fin de chaque réglage, effleurer la touche "Fin" pour l'écran de réglage initial de la copie.

L'affichage retourne alors à l'écran de sélection de mode de contrôle.

●Terminación del ajuste por omisión de copia

1.Cuando termine cada ajuste, toque la tecla "Fin" para la pantalla de ajuste por omisión de copia.

La indicación vuelve al menú de ajuste del modo de administración.

2.Touch the "Basic" key.

The display will return to the basic screen.

2.Effleurer la touche "De base".

Le panneau de touches à effleurement retourne à l'écran de base.

2.Toque la tecla "Básico".

La pantalla de toque volverá al menú básico.

● Machine default setting

Machine default setting	Content of machine default setting	Page
	Select whether unfixed size paper is used or not in the stack bypass tray. Touch the "ON"	151
1 Un-fixed size from bypass	key to set the custom size paper. (page 151)
	Touch the "OFF" key to detect the standard size paper automatically.
2 Automatic drawer switching	Whether the automatic drawer switching function (page 25) is used or not can be	152
	selected.
3 Drawer paper size	The drawer size displayed on the touch panel can be set. When setting "APS", the	153
	drawer size will be detected automatically and displayed on the touch panel.
4 Special paper	Paper size key for a drawer with special paper such as colored paper or recycled paper	153
	can be marked with an asterisk (*) on the basic screen.
5 APS for special paper	Whether paper in the drawer set for the "4 Special paper" on page 153 is used or not for	153
	the auto paper selection mode or automatic drawer switching (page 25) can be selected.
6 Key sound	A "beep" sounds when touching the touch panel can be turned off.	154
	A certain length of time during which copying ends and the energy saver function (page	154
7 Auto preheat time	101) is actuated automatically can be set. Set this time from 5 to 45 minutes in
	increments of 5 minutes. The initial setting time is 15 minutes.
	If the copier is not used for a certain length of time, the auto shut-off function (page 102)
	automatically switches off the power. Set this time from 15 to 240 minutes in increments
8 Auto shut-off time	of 15 minutes.	154
	The auto shut off function can be turned off as well. ("0 Auto shut-off")
	The initial setting time is 60 minutes.
	* It is recommended to extend time for starting auto shut-off when the copier is used
	frequently, and shorten when it is not used frequently.

148