Message

Action

Page

 

 

 

“Time for maintenance.”

Periodic maintenance is necessary to keep your copier in good condition.

__

 

Contact your service representative as soon as possible.

 

 

 

 

“Memory full.”

Memory is full. Select if print till the last page which has just read or clear

__

all of the data which has already been read. Copying or reading of another

 

original cannot be performed until one of these is selected.

 

 

 

 

 

If paper is misfed, the copier will stop, and the location of the misfeed will

174

“Paper misfeed.”

be displayed in the message display. Remove the misfed paper with the

 

main switch ON ( ) in accordance with the procedure.

 

 

 

 

“Install Finisher”

The finisher (optional) is not installed correctly. Install it securely.

__

 

 

 

“Check paper in Finisher.

Unfinished copies were ejected into the tray of finisher (optional) due to

__

Incomplete copies inside.”

the problem happened during copying. Check and remove those copies.

 

 

 

 

“Finisher is out of order.

Copier is inoperable due to the problem of the finisher (optional). Contact

__

Detach Finisher.”

your service representative.

 

 

 

 

“Paper capacity exceeded.

The number of sheets in the finisher (optional) exceeds the capacity.

__

Remove paper from Finisher.”

Remove them.

 

 

 

 

“Remove paper from inner tray

Paper is misfed inside of the finisher (optional). See the finisher’s

__

of Finisher.”

“Remove paper from Finisher.”

instruction handbook to remove paper.

 

 

 

 

 

 

“Out of staples. Add staples.”

There are no staples in the indicated location of the finisher (optional).

__

 

See the finisher's instruction handbook to load staples.

 

 

 

 

“Cannot staple.

Stapling cannot be operated since the number of copies in the staple sort

__

mode has exceeded its maximum capacity. Press the Start key and

##:maximum capacity(Staple)”

cancel the staple sort mode to restart copying operation.

 

 

 

 

 

 

“Cannot staple this size.”

Stapling and punching cannot be operated with small size paper, such as

__

“Cannot punch this size.”

51/2” x 81/2”. See the finisher’s instruction handbook.

 

 

 

 

“Check punch waste tank.”

The punch waste tank of finisher (optional) is full of punch waste. See the

__

 

finisher’s instruction handbook to remove the punch waste.

 

 

 

 

167

Page 172
Image 172
Kyocera 5230, 4230 manual 167