Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning
operation.
Presetting Stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
15 | AM stations | • AM | Medium Wave |
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER/
BAND button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
2 Tune in to the desired station.
Automatic Tuning 1 Press 
button to
select the preset station.
Press and hold TUNING button to automatically search the band.
Briefly press TUNING button to increase or decrease the
frequency incrementally.
Press the
1TUNER(BAND) button and select the FM band.
•Each time the button is pressed, the band switches between "FM ➝ AM".
kHz 
MHz
2 Press TUNING to select "89.10".
•Refer to Step 2 on page 63 to automatically or manually tune in to a station.
kHz 
MHz
Main Unit
Press the TUNER
1button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning Press the STOP ( 
)
button to select
MANUAL and then press and hold 
button to select the
preset station.
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
3 Press the TUNER MEMORY button.
•“PROGRAM” flashes in the display.
PROGRAM 
kHz MHz
4 Press 
to select preset number.
•You can select between 1 and 15.
PROGRAM 
kHz MHz
OPERATION RADIO
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
63 | • In a poor reception area, select MONO for a clear, |
|
To tune in to a preset station, press
on the remote control to select a channel.
64