Connecting to External Components

Connecting to an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

Audio Cable

If the external analog

component has only one

Audio Out, connect either left

or right.

Connecting the FM, AM Antennas

 

If AM reception is poor, connect an

 

outdoor AM antenna(not supplied).

 

CONNECTIONS

 

AM Loop Antenna

FM Antenna (supplied)

(supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

1

2

Connect Audio In on the DVD player to Audio Out on the external analog component.

•Be sure to match connector colors.

Press AUX to select AUX.

•‘AUX’ appears in the display.

FM antenna connection1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

AM antenna connection1.Connect the AM loop antenna suppliedto the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

13

14