CARE AND MAINTENANCE
CAUTION HOToilmaycauseburns. Allowenginetocoolbeforedraining oil.
CHANGING THE ENGINE OIL:
1.The "snap lock" oil drain valve is located on the left side of the engine crankcase
on the Briggs & Stratton, and the right side of the Kohler.
2. Place a suitable container under the drain valve. The fitting of a short piece of hose to the valve will help direct the oil.
3.Push the valve body in and twist to clear the detent notch.
4.Pulling the valve body outward will start the flow of oil.
NOTE: Refer to engine manufacturers recommendations for frequency of oil changes.
OIL FILTERS:
•Replace filter each time the oil is changed.
•These filters can be obtained from your authorized engine dealer. •The use of any other oil filter may cause damage to the engine.
Briggs & Stratton Oil Filter: | Kohler Oil Filter: |
P/N 492 932 | P/N 52 050 02 |
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
Page 28
