SECO-LARM USA EV-7105-NPEQ, EV-7105-PPEQ manual Swing Setup Menu, Cancel / OK

ENFORCER Mini PTZ Camera

SWING SETUP Menu

From DOME CAMERA SETUP

SWING SETUP
	SWING NO.		1
	1ST POS.		NOT USED
	2ND POS.		NOT USED
	SWING SPEED		30/SEC
	CLEAR SWING		CANCEL
BACK
EXIT
EDIT LABEL – PRESET 1
SWING NO.		1
1ST POS.		PRESET 5
2ND POS.		NOT USED
		UNDEFINED

This menu configures up to eight different swing motions back and forth

between two different PRESET positions.

When the SWING function operates, the camera moves (pans and tilts) to the PRESET position that was set as the "1ST POS." and then moves clockwise to the PRESET position set as "2ND POS." At that point, the camera moves counterclockwise back to the "1ST POS." It then repeats that motion back and forth between the two PRESET positions until another command is inputted.

	[1 ~ 8]
	Selects which SWING motion to edit. Choose 1
SWING NO.	through 8. If a selected SWING motion has not
	been defined, "NOT USED" is displayed in the first
	and second positions for that motion
1ST POS.	[PRESET 1 ~ 94 or 96 ~ 128]
	[PRESET 1 ~ 94 or 96 ~ 128]
	Select the two PRESET positions between which
2ND POS.	the SWING motion will operate. NOTE -- If a
	selected PRESET was not previously defined via
	the OSD programming, "UNDEFINED"
	will be displayed.
SWING SPEED	Programs the speed at which the camera moves,
	between the two PRESET positions.
	[CANCEL / OK]
CLEAR SWING	Choose “OK” to delete the data in the selected
	SWING.

28 SECO-LARM, U.S.A., INC.