SECO-LARM USA EV-7105-PPEQ, EV-7105-NPEQ manual AE Setup Menu Auto Exposure

ENFORCER Mini PTZ Camera

AE SETUP Menu (Auto Exposure)

From ZOOM CAMERA SETUP

AE SETUP - GLOBAL
	BACKLIGHT	OFF
	DAY/NIGHT	AUTO
	BRIGHTNESS	25
	IRIS	AUTO
	SHUTTER	ESC
	AGC	NORMAL
	SSNR	MIDDLE
	SENS-UP	AUTO
BACK
EXIT

BACKLIGHT	[ON / OFF]
	Sets the backlight compensation.
	[AUTO1 / AUTO2DAY / NIGHT]
DAY/NIGHT	AUTO1 flips between the day and night
	modes faster than AUTO2.
	[0~100]
	Adjusts the brightness of the image. The
BRIGHTNESS	IRIS, SHUTTER, and gain settings are all
	adjusted automatically as the
	BRIGHTNESS is adjusted.
	[AUTO / MANUAL (0~100)]
	If IRIS is set to AUTO, the IRIS of the
	camera is set automatically according to
	the SHUTTER, which should be manually
IRIS	set.
	If IRIS is set to MANUAL, the IRIS setting
	should be manually set while the
	SHUTTER is set to ESC or A.FLICKER.
	[ESC / A.FLICKER / MANUAL]
	(x1/60~1/120,000 sec.)
	If IRIS is set to MANUAL and SHUTTER
	is set to ESC (electronic shutter control),
	the SHUTTER is automatically set
	according to the IRIS setting.
SHUTTER	Set SHUTTER to A.FLICKER (flickerless)
	to automatically compensate for CFL light
	flicker. If interference from CFL light flicker
	persists, set the SHUTTER to 1/100-
	second for NTSC or 1/120-second for PAL
	systems.
	If SHUTTER is to be set manually, set
	IRIS to MANUAL.
	[OFF / NORMAL / HIGH]
AGC	AGC (auto gain control) enhances the
	camera image brightness automatically if
	the light level of the image is too low.
	[OFF / LOW / MIDDLE / HIGH]
SSNR	SSNR noise reduction enhances images
	by reducing signal noise when the gain
	level of the image is too high.
	[AUTO (2~128) / OFF]
	When set for AUTO, the SHUTTER is
	automatically adjusted so that multiple
	frames are combined into a single frame
SENS-UP	in low-light conditions. For instance, when
	set to "8" the images from eight frames
	are combined into one frame to increase
	the light level. However, this also creates
	"ghost" images.

SECO-LARM, U.S.A., INC. 23