CARE AND MAINTENANCE
CUTTER BLADE MAINTENANCE:
NOTE: Observe proper blade position prior to removal.
1.Safely raise front of mower.
2.Hold or block blade from turning.
3.Loosen blade nut and remove blade.
4.When replacing blade, tighten blade nut securely. Refer to diagram.
CAUTION | Wear heavy, thick gloves when holding onto cutter blade. |
| Avoid touching the sharp edge of the blade. |
NOTE: BE SURE BLADE IS CENTERED ON PILOT BEFORE TIGHTENING NUT TO 60 FT. LBS. TORQUE.
Threaded end of Blade Shaft
Trash Guard
Mower Blade
Nut 
Page 24
