CARE & MAINTENANCE
BELTS:
Check belts every 50 hours. Replace any belts found to be in poor condition.
BELT TENSION:
42” Deck
Mower Deck Serpentine
Engine to Mower Deck Belt-P/N 5861
Auto tensioner with spring loaded idler.
No adjustment required.
50” Deck
Mower Deck Serpentine
Manual adjustment. Refer to illustration below.
Engine to Mower Deck Belt-P/N 7174
Auto tensioner with spring loaded idler.
No adjustment required.
Idler Weldment | Idler Shock |
| Mount |
“L” Rod | Hex Nut |
3/4”
(42”/50” Serpentine)
Tighten or Loosen Hex Nut to achieve this dimension
34
