CONTROLS
PARKING BRAKE:
The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion.
CAUTION .
Engage parking brake before starting engine
TO SET PARKING BRAKE:
The hand operated parking brake is located at left hand side of mower.
To engage brake, pull lever up (to the rear).
To release brake, move lever forward (down).
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.
HYDRO-GEAR DRIVE SYSTEM:
Allows the mower to turn on its own axis (zero turning radius). Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very light.
Page 16
