CARE AND MAINTENANCE - 5000 SERIES MODELS

MOWER DECK INSTALLATION:

NOTE: Brake link (P/N 5283) normally used for installation of engine to mower deck drive belt, has been placed in position during assembly of the lift frame at the factory. For shipment purposes, the brake link has been secured with a cotter pin and washer. REMOVE AND DISCARD cotter pin and washer after engine to mower drive belt has been installed.

1.Loosen and remove front body mounting bolts (P/N 3368) and washers (P/N 3066). Disconnect headlight wiring plug from wiring harness. Lift front body from chassis.

2.Install rear hanger rods on lift frame. Slide lift plate on hanger rods, small holes in lift plate will face rear of mower, and start nylok nuts on each hanger rod until approximately 1/2 inch of threads are exposed.

3.Position mower deck under chassis.

4.Raise front of mower deck and slide front support rod through lift frame and tabs on mower deck. Install hair pin clips on front and rear of support rods.

5.Move lift lever to lowest cut position, install engine to mower deck drive belt on top center pulley. Check belt routing after installation to make certain that belt is centered in groove of electric clutch pulley.

6.Move lift lever toward high cut position and remove brake link from hole on lift lever.

7.Install front body, connect headlight wiring.

Page 30

Page 33
Image 33
Dixon ZTR 5423 manual Mower Deck Installation

ZTR 5423 specifications

The Dixon ZTR 5423 is a robust and efficient zero-turn mower designed to cater to both residential and commercial landscaping needs. This machine exemplifies strength, durability, and user-friendly features, making it a popular choice among lawn care professionals and enthusiasts alike.

One of the standout elements of the Dixon ZTR 5423 is its powerful engine. Equipped with a reliable, high-performance engine, this mower offers impressive torque and horsepower. This ensures that it can tackle various terrains and overcome tough grass conditions with ease. The engine is coupled with a smooth hydrostatic transmission, allowing for seamless speed adjustments and effortless maneuverability. Operators can easily control their speed and direction, which is particularly beneficial when navigating tight corners or intricate landscaping layouts.

The ZTR 5423 features a strong, reinforced steel chassis that enhances its structural integrity. This robust construction not only prolongs the life of the mower but also provides stability during operation, even on uneven ground. Additionally, the mower's cutting deck is designed to deliver a clean and precise cut, promoting healthy lawn growth. The wide, versatile cutting deck size allows for efficient coverage, reducing mowing time without compromising on quality.

Dixon has integrated advanced technology into the ZTR 5423, enhancing its functionality and user experience. One notable feature is its adjustable cutting height, allowing users to customize their mowing experience based on the grass type and season. This flexibility ensures optimal cutting performance and lawn health. The mower also features comfortable ergonomics, including an adjustable seat and high-quality armrests, providing maximum comfort during prolonged use.

Another significant characteristic of the Dixon ZTR 5423 is its ease of maintenance. The mower includes accessible maintenance points that simplify routine checks and upkeep. This user-centric design reduces downtime and ensures that the mower remains in peak working condition.

Overall, the Dixon ZTR 5423 stands out in the market due to its powerful performance, advanced features, and thoughtful design. Whether for professional landscaping or home lawn care, this mower offers the reliability and functionality that users seek, making it a worthy investment for anyone looking to enhance their mowing experience.