DKS Enterprises 1814 - page 8

FEATURES

• Can provide service for up to 3000 residents.

• System keypad will emit DTMF tones after a call is answered allowing the system to be used

with auto-attendants, answering machines, etc. This feature is available with the

following units only:

Model 1814 with 1843-010 circuit board, REV B or higher.

• Directory codes can be set from 1 to 4 digits in length and can be randomly assigned.

• 10 programmable area codes allow the system to be used in areas requiring 10 and 11-digit

dialing.

• Two internal relays allow the system to control a main entry point plus an additional entry

point.

• Large A and Z scroll buttons provide an easy method to locate names in the electronic

directory. Buttons can be held to scroll through the directory rapidly, or pressed and released

to scroll one name at a time.

• All name searches start in the middle of the database to reduce scroll time.

• “One Touch” Call button allows users to initiate a call without having to enter a directory code

on the system keypad.

• Backlit super-twist LCD uses large ½-inch characters that are easy to read.

8

Contents

Main Owners Manual Page Use this manual with the following models only. TABLE OF CONTENTS Preface Section 1 Installation Section 2 Wiring Section 3 Programming Section 4 Adjustments Section 5 Operating Instructions Section 6 Maintenance and Trouble Shooting IMPORTANT NOTICE FCC - UNITED STATES DOC - CANADA Notice: Notice: Page Page SECTION 1 - INSTALLATION 1.1.1 Surface Mount Units 1.1.2 Surface Mount Units with Recess Box 1.1.3 Flush Mount Units 1.1.4 Flush Mount Rough-in Box 1.1.5 Flush Mount Trim Ring 1.1.6 Flush Mount Surface Mounting Kit 1.1.7 Wall Mount Units Page Page SECTION 2 WIRING Page Page 2.2.1 Controlling a Single Door or Gate Gate Operator Electric Strike Magnetic Lock 2.2.2 Controlling a Gate Operator and Pedestrian Gate (or Door) AND Gate Operator Electric Strike Magnetic Lock Page SECTION 3 PROGRAMMING 3.1.1 Programming from the Keypad 3.1.2 Programming with an IBM Keyboard 3.1.3 Programming with a Touch-Tone Telephone 3.2.1 Master Code 3.2.2 Single or Multiple Systems 3.2.3 Programming for Call-up Operation 3.2.4 Relay Strike Time 3.2.5 Talk Time 3.2.6 Tone Open Numbers 3.2.7 Postal Switch 3.2.8 Touch-tone / Rotary-dial 3.2.9 Rotary-dial 9 3.3.1 Programming Letters and Numbers MNO 3.3.2 Programming the User Message 3.3.3 Programming the Instruction Message Page 3.4.1 Programming the Directory Code Length 3.4.2 Programming 7-digit Phone Numbers 3.4.3 Programming Area Codes 3.4.4 Programming Phone Numbers with Area Code Reference 3.4.5 Programming Names 3.4.6 Deleting Individual Phone Numbers 3.4.7 Delete Names 3.4.8 Delete Area Codes 3.4.9 Display Phone Numbers 3.5.1 Programming Four-digit Entry Codes 3.5.2 Delete Four-digit Entry Codes 3.5.3 View Four-digit Entry Codes 3.5.4 Entry Code Divide Number Page SECTION 4 ADJUSTMENTS 4.1 Speaker Volume 4.2 Feedback 4.3 Click Sensitivity 4.4 Display Contrast 4.6 Ring Pin 4.7 Relay 2 Contact Pin 4.8 Auto 1816 Pin 4.9 HF HS Pin 1814 Adjustment Locations Page SECTION 5 OPERATING INSTRUCTIONS 5.2.1 Responding to a Guest Call 5.2.2 Using an Entry Code 5.3.1 Opening from a Remote Location 5.3.2 Hold-Open Command 5.3.3 Relay Check 5.4.1 Talk Time 5.4.2 Line Sharing 5.4.3 Connection to a PBX 5.4.4 Areas with 10-digit Dialing Page SECTION 6 MAINTENANCE SYMPTON POSSIBLE SOLUTION(S) SYMPTON POSSIBLE SOLUTION(S) Page Page Page Page Page Resident Instruction Sheet Guest Communication Granting or Denying Access Call Waiting Privacy