signal processing
6)DISPLAY - The LED display in Program mode, shows which Bank and Program is currently selected. In Edit mode, it shows the number and/or status of the selected effect.
7)DATA WHEEL - In Program mode, use the Data wheel to scroll through Programs. In Edit mode, use it to change the setting of effect groups.
8)CLIP LED - The red Clip LED lights when clipping occurs at the input of the FX7. To eliminate clipping, reduce the setting of the Input Level control or the Master Level parameter.
9)OUTPUT KNOB - Controls the overall output level of both the Left and Right outputs and the Headphone output.
10)INPUT KNOB - Controls the level of the signal at the FX7's input stage.
Rear Panel Connections
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
|
| Manufactured in the USA by |
|
|
|
| ||
|
| A Harman International Company |
|
|
|
| ||
INPUT | HEADPHONE OUT | LEFT/MONO OUT | RIGHT OUT | VOLUME/WAH | POWER INPUT | |||
9V | 500 mA | |||||||
|
|
|
|
|
|
The FX7's rear panel is even simpler than the front, and that means faster hookup times for you. The rear panel has:
1)INSTRUMENT INPUT - Plug your instrument in here.
2)
3)HEADPHONE OUTPUT - This stereo mini phone plug is for your headphones. The overall headphone level is controlled by the Output level knob.
4)LEFT / MONO OUT - For stereo applications, this is the Left main output. Use this jack for mono applications.
5)RIGHT OUT - For stereo applications, this is the Right main output. For mono applications, leave this jack unconnected.
6)VOLUME/WAH CONTROLLER INPUT - This 1/4" connector is used to connect most volume pedals or 0/+5v controller pedal to the FX7 for
7)AC POWER INPUT - Connect the supplied AC power adapter to this jack. Use only the adapter supplied with the FX7. Use of any other adapter may damage the unit.
8)POWER CORD STRAIN RELIEF - This clip prevents the AC power cord from being accidentally pulled out.
6 | FX7 owner's manual |