Model 585 Time Scaling Processor Time Scaling
3-4
In Point
The In point is the point in the audio clip when playback starts. If the transport
position is at or before the In point when you press Play, playback begins at the
In point. When the transport is at the In point, the display shows a dot before the
word In: ·In.
To set or reset the In point to the current transport position, press Shift + . You can
set the In point in either play or stop mode.
Note: If you need to reset the In point to a point earlier than the current In point,
rotate the knob to move to a transport position before the In point and press
Shift + to reset the In point.
Out Point
The Out point is the point in the audio clip when playback ends. If the transport
position is beyond the Out point when you press play, playback starts at that transport
position and continues until the end of the clip, or until you stop playback. When the
transport is at the Out point, the display shows a dot before the word Out: ·Out.
When the transport is at the Ou t point, pressing play does not start playback.
To set or reset the Out point in the current clip, press Shift + Enter.
Knob Function in Play Menu
In the Play menu, you can use the knob to adjust the transport position in the
recorded clip. As you move through the clip, the time display updates to show your
position in the recorded clip. There are two ways to use the knob to adjust the
transport position: rotating the knob by itself, and rotating the knob while holding
down Shift.
When you rotate the knob by itself, the display shows or and a number indicating
how fast you are moving through the clip. This rate reflects how fast you rotate the
knob. This mode makes it easy to move short distances or locate a specific point in
the clip. When you stop rotating the knob, the transport returns to stop m ode.
When you hold down Shift while rotating the knob, you move through the clip
according to the position of the knob compared to its position when you begin
holding down Shift. In this mode, the display shows « or » and a number indicating
how fast you are moving through the clip. Moving the knob 120° in either direction
from the initial position brings you to the beginning or end of the clip. While in this
mode, the audio level is lowered by 6 dB. The audio level returns to normal after the
transport has stopped. Once you move the knob, as long as you hold the Shift button
you continue to move at the speed and direction set by the position of the knob. When