Model 585 Time Scaling Processor Getting Started
2-6
Table 2-1 Front-Panel Button Definitions
Button Result
Shift Selects the alternate function for a button. To select Status or Bypass,
hold down Shift and press the button under the selection you want.
Setup From any status menu, displays the last setup menu viewed, or the Unit
Setup menu if a setup menu has not been viewed in the previous five
minutes. From any setup menu, displays the Unit Setup menu.
Status From any setup menu, displays the last status menu viewed, or the main
status menu if a status menu has not been viewed in the previous five
minutes. From any status menu, displays the main status menu (program
configuration and amount of pitch shift).
Scrolls to previous item in menu selection display. In menus that
determine a numeric value, increases that value.
Scrolls to next item in menu selection display. In menus that determine a
numeric value, decreases that value.
Enter Activates the menu or setting on the low er line of the display.
Esc Reverts to the next-higher menu level, or if the active setting is different
from the setting on screen, returns the display to the active setting.
Bypass Activates bypass mode. Processing latency remains in effect, but no
adjustments are made to the output signal.
To take the unit out of bypass mode, press Shift + Bypass again.
Note: In all menus, settings other than the active one display a flashing block next to
the setting. Press Enter to select the setting shown, or Esc to return to the
active setting.
2.4.3 Knob
The knob offers quick adjustment of many menu options.
Rotating clockwise scrolls through setup menu options in the same way as pressing
. Rotating counterclockwise scrolls through setup menu options in the same way
as pressing .
In the main status menu, you can adjust the pitch shift value by turning the knob.
Pressing Shift while turning the knob changes the sensitivity level. Pressing either
arrow button scrolls to other status menu displays.