Dolby Laboratories 6000 II. Getting Started, Check Accessories, USE Remote Controller, Box

II. GETTING STARTED

CHECK ACCESSORIES

Remove your HDD video recorder carefully from the box, You may wish to store the packaging for future use.

In the box

Included in this package should be:

Table 1

HDD video recorder	1
Remote controller	1
AAA batteries	2
User’s manual	1

Read these instructions before use.

Switching on

Connect the 2-pin main plug into the main socket and switch on.

Press the power button on the front of the unit to turn the HDD video

recorder on or off.

Figure 1

USE REMOTE CONTROLLER

1.Open the battery compartment.

2.Insert two AAA batteries, make sure to match “+” and “-” of the batteries to the marks in the battery compartment.

3.Close the battery compartment. Notes:

1.Batteries can last for about 6 months generally. Change the batteries of the remote controller if it does not work.

2.If the remote controller is not used for a long time, remove the batteries to prevent battery leakage.

2 1

3

Figure 2

CONTROL HDD VIDEO RECORDER

Point it at the front of the HDD video recorder; press the relevant button to choose demand function.

The remote controller will work up to 6 metres from the HDD video recorder and at an angle of up to 45 degrees.

Do not block the path of the beam from the remote controller to the HDD video recorder, dark walls direct sunlight or bright light will reduce the remote control sensitivity.

Figure 3

-2-