Dolby Laboratories CD Player manual ~~y... ,,,- .~

Speaker Connections

1.Connect Main Speaker wires (Left & Right) from the Main Speaker to the amplifier's 'MAIN'speake terminals.

2.Connect Surround (Rear) Speakers wires (Left & Right) from the Surround (Rear) Speaker to the amplifiel\ Surround (Rear) speaker terminals.

3.Connect Centre Speaker wires from the Centre Speaker to the amplifier's centre terminal.

NOTE: Ensure in each case that the striped (+) wire is connected to the (+) terminal of the speaker outpU and the non-striped wire (-) is connected to the terminal of the speaker output. Also ensure that the correQ orientation for left and right main speakers is observed.

Main Speakers (Left and Right)

Centre	Surround
	(Rear)Speakers
Speaker
	(Left and Right)
a	DO

o

I [:JD

:

~00

~

Speaker Positioning Instructions

Place the Main Left Speaker to the left of the audio system as seen from the front of the audio system. Place the Main Right Speaker to the right of the audio system as seen from the front of the audio system.

Place the Centre Speaker on top, below, or at the front of the audio system.

Place the Surround (Rear) Speakers behind and aimed toward the viewing area. The viewing/listening area should be between the audio system and the Surround (Rear) Speakers.

a-- Main speaker (UR) b-- The audio system c-- Centre speaker

d-- Surround (Rear) Speaker (UR) e-- Viewing / listening area

Wall mountable Surround(Rear) Speakers

1.Mark the correct mounting position on the wall.

2.Insert a screw and screw them at the marked position on the wall.

3.Align the slot holes of the speaker over the screw and pull the speaker downward until it is firmly hooked.

Surround (Rear) Speaker

E-4

~~y...;",""",,-:.~