Dolby Laboratories DVD/VCR Combo owner manual / /

- 46 -
Manual Clock Setting
Preparation
• Turn on your TV and select the video channel. (See setting the 3 4 Output Channel.)
• Press the VCR ON/OFF button (VCR ON indicator will light up) and then press the TV/VCR button to select
“VCR”.
(TAPE IN indicator will light up.)
1. Press the MENU button. Select “CLOCK” with the cursor or button and then press the ENTER button.
SELECT :
ENTER : SET
MENU
TIMER
SET UP
CHANNEL PRESET
LANGUAGE
CLOCK
EXIT : MENU
MENU
CLOCK
AUTO
MANUAL
SELECT :
ENTER : SET CHANGE : EXIT : MENU
VCR Setup
(continue on next page)(continue on next page)
(continue on next page)(continue on next page)
(continue on next page)
ENTER
ENTER
3. Select “TIME” with the cursor or button and set time by holding the cursor or button.
EX.: 10:28 AM
Numbered buttons can be used instead of cursor or button to set time and date. Press the AM/PM (+10) to
select AM or PM during time setting.
4. Select and set “DATE”, “YEAR” and “ DST” in turn, in the same manner as in Step 3.
(See Automatic Daylight Saving-Time (D.S.T.) Adjustment)
EX.: Jul.4, 2002, DST: ON
5. If the data I correct, press the ENTER button to enter.
The screen returns to normal.
TIME DATE YEAR DST
10 : 28 7 / 04 THU 02 ON
SELECT :
ENTER : SET CHANGE : EXIT : MENU
CLOCK
AND
/
/
Normal
Screen
ENTER
Notes:
• In Step 1, if you press the MENU button when operating the screen setting for the first time or after the power is
interrupted for more than 5 seconds, the LANGUAGE screen will appear.
• If you entered incorrect data during the setting procedure, re-enter the correct data in the following manner:
1. Use the cursor or button to select the data to be corrected.
2. Set the correct data with the cursor or button.
3. After correcting the data in Step 2, press the ENTER button to enter.
• If you press the MENU button to exit the CLOCK screen in Step 5, the data will not be stored.
• If a button is not pressed within 3 minutes during the setting procedure, the screen will return to the normal
screen.
2. Select “MANUAL” with the cursor or button and then press the ENTER button.