Dolby Laboratories DVD/VCR Combo Playback

- 48 - (continued on next page)(continued on next page)

(continued on next page)(continued on next page)

(continued on next page)

VCR Playback

Gently insert the video cassette into the cassette compartment. The VCR turns on automatically and VCR ON

indicator light up. If the cassette is inserted incorrectly, the loading system will not function. Do not force the cassette

into the VCR.

To remove the cassette, press the TAPE EJECT button during stop mode.

Playback

Preparation

Turn on the TV and select the video channel. (See Setting the 3 ↔ 4 Output Channel.)

1. When the unit is powered ON and set to VCR mode by pressing the FUNCTION button.

2. Press the VCR ON/OFF button to turn on the VCR. The VCR ON indicator lights up.

3. Inser t a cassette.

4. Press the PLAY button. (The automatic tracking control system engages and “PLAY” flashes on the TV

screen for a few seconds. See Automatic T racking control System.) TAPE IN indicator will light up.

5. To stop playback, press the STOP button on the unit or the VCR STOP button on the remote. (If the tape

reaches its end, the VCR will automatically rewinds the tape to the beginning, turn its power off and ejects the

tape.)

Notes:

• If noise should remain on the TV screen after tracking adjustment has been completed by the Automatic Tracking

Control System, use the manual tracking mode.

• Press the CH +/- buttons during playback mode to change to manual tracking mode. Adjust the trac king using the

CH +/- buttons until the noise is minimized or eliminated.

• For tapes recorded in EP on another VCR that still have vertical jitter even after manual adjustment, hold down

the PLAY button for about 2 seconds. (On screen displa y may be blurred.) Ejecting the tape or turning off the

power will return playback to its normal mode.

1. When the VCR is in stop mode, press the TUNING or TUNING button to fast forward or rewind the cassette.

(The picture cannot be viewed in this mode.)

2. Press the STOP button on the unit or the VCR STOP button on the remote to halt fast forward or rewind.

Notes:

• The TUNING and TUNING buttons speeds may be slower for cassette tapes other than T-60, T-90 or T-120.

• After rewinding the T-120 cassette tape for about 2 minutes, you can fast forward the cassette tape.

Use the following procedure to quickly find the section you want, while viewing the picture.

1. During playback, press the TUNING button for forward video search or the TUNING button for reverse

video search.

There are 2 search speeds in each direction. The VCR switches between them each time the button is pressed.

2. Press the PLAY button to resume normal playback.