Basic Operations
Auto Scan
Select the Signal Type of your TV input and start auto scan.
| Signal Type: | Cable | |
|
| Start Scan | |
Move | Change | OK Select | RETURN Previous Setup INFO Exit |
Exit Retail Mode
1Press RETURN.
2Press 
or 
to select “OK”, then press OK to conm.
Do you wish to exit Retail Mode?
OKCancel
ENGLISH
7Press OK to start channel scan.
Scanning
Channel scan in process, if you want to stop scanning, please press "Stop Scan".
Scan Status:
0%
Analog Channel: | 0 |
Digital Channel: | 0 |
Stop Scan
OK Select
Note:
tScanning may take some time to complete.
tSelect Stop Scan to cancel the auto scan at anytime.
8When auto scan is complete, press OK to continue.
Scan Finish
Channel scan completed. |
|
Analog Channels: | 12 |
Digital Channels: | 26 |
OK
Basic TV Operation
Changing Channel
Press the number buttons to directly select channels.
Note: After pressing the number buttons, there will be a few seconds delay before the TV changes channel. To change to the channel right away, press ENT after pressing the number buttons.
To Browse Channel
Press the Channel up/down buttons on the
remote control or CH 
, CH 
on the TV to increase or decrease the channel.
CH | Press to scroll through the |
| channels manually. |
To Select Analog Channels
1~9 | Press 1~9 as needed. Example, |
| to select channel 2, press 2, then |
| press ENT. |
10~99 | Press the 2 digits in order. |
| Example, to select channel 15, |
| press 1, 5, then ENT. |
100~135: | Press the 3 digits in order, |
| Example, to select channel 130, |
| press 1, 3, 0, then press ENT. |
OK Select | RETURN Previous Setup INFO Exit |
19
