6
Handy functionsPlayback modes
The effect may differ with different kinds of music.
Depending on the recording conditions, sound may be interrupted
when switching between EQ settings.
MP3
You cannot select “RND” and “A
B” with MP3.
77RND RND A
17B
7
While playing
or
while paused
One track
repeat
All track
repeat
Random
repeat AB repeat
(below)
Random
No display (canceled)
RQT8472
Changing the play mode Changing the sound quality

(backward) (forward)

While stopped, use

[]

or

[]

to

select the track number.

MEMO Press to enter.
030-00:01
-
030-00:01
-
Sequence number
Album number
Will appear after
[MEMO] is pressed
Track number
Track
number
Sequence
number
030-00:01
-
MP3
CD-DA
Repeat steps toto program up to 20

tracks.

> Press to play.
Playing desired tracks only (Program play)
To select another album (Dpage 5, Album skip)
You cannot select album mode during program play (Dabove).
No display
(canceled)
ALBUM MODE
(Only tracks on the
desired album are played)
The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates skipping
caused by vibration. You can change the anti-skip memory time.
POS2 POS1
Anti-skip enhanced mode
Able to withstand a maximum of
45 seconds of vibration
Sound enhanced mode
Able to withstand a maximum of
10 seconds of vibration
MP3 You cannot change the memory time for MP3. It is a maximum
of 100 seconds for MP3 recorded at 128 kbps.
Changing the anti-skip mode
CD-DA
Specifying the AB segment
Press to specify the start point (A).
Press once more to specify the end point (B).
Stop or skip (Dpage 5) to cancel.
If you do not specify point B this will automatically be set as the
end of the disc. Repeat begins when this point is reached. You can
also specify point B again by pressing [MEMO].
MP3
and
CD-DA
indicate
limitations on these discs only.
You can regenerate signal frequency lost during compression, restoring the
sound to near pre-compression form.
MEMO
Confirm tracks selected: While playing, press [MEMO].
Cancel: Press []. (“M” disappears.)
TRAIN
Reduces sound leaks
and listening fatigue
Enhanced S-XBSBoosts the bass
No display (canceled)
Enjoying more natural sound (Digital Re-master)
MP3
RMTR No display
Conserves battery life
Sound enhanced
Turn off this unit and the other equipment before connection.Insert each plug fully. [Plug type: 3.5 mm (1/8 in.) stereo]
Audio cable (not included)
To CD or AUX terminals
Audio system and so on
Main unit
pYou cannot use an optical cable.
When connecting the unit to other equipment, set the volume
level between 10 to 15, then use the volume control on the other
equipment to adjust the volume.
Connecting to other equipment

> ■
EQ MEMO
PLAY MODE
Playing only the tracks in a selected album
(Album mode) MP3
PLAY MODE Each time you press
PLAY MODE Each time you press and hold
MEMO While stopped,

each time you press and hold

MEMO While stopped,

each time you press and hold

EQ Each time you press
Side of the main unit
MP3
and
CD-DA
indicate
limitations on these discs only.