Dolby Laboratories LC-19SB25U-W, LC-19SB15U Advanced picture settings, Film Mode

Basic adjustment settings

Advanced picture settings Film Mode

Advanced setting enables you to set the picture adjustment in more detail. There are four options you can choose from.

C.M.S. (Color Management System)

Color tone is managed using the six-color adjustment setting.

1	Press MENU and the MENU screen displays.
2	Press c/d to select “Picture”.
3	Press a/b to select “Advanced”, and then
	press ENTER.

Press a/b to select a specific adjustment

4 item among “C.M.S.-Hue”, “C.M.S.-Saturation” and “C.M.S.-Value”, and then press ENTER.

C. M. S. – Hue
C. M. S. – Saturation		R	[	0]	–	+
C. M. S. – Value		Y	[	0]	–	+
Color Temp.		G	[	0] –		+
Film Mode		C	[	0] –		+
3D - Y/C		B	[	0] –		+
Monochrome		M	[	0] –		+
I/P Setting	Reset

5	Press c/d to adjust the item to your desired
	position.

•For resetting all adjustment items to factory preset values, press a/b to select “Reset”, and then press ENTER.

Selected item	Description
C.M.S-Hue	This is a standard to adjust the color
	either more reddish or more bluish in tone.
C.M.S-	Increases or decreases the saturation of a
Saturation	selected color
C.M.S-Value	A higher value makes the image brighter.
	A lower value makes the image darker

Color Temperature

For a better white balance, use color temperature correction.

Selected item	Description
High	White with Bluish tone
Mid-High
Middle
Mid-Low
Low	White with Reddish tone

Automatically detects a fi lm-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyzes it then recreates each still fi lm frame for high-defi nition picture quality.

Selected item	Description
On	Detects, analyzes, converts fi lm source
Off	Normal viewing mode

3D-Y/C

Provides high quality images with minimal dot crawl and cross color noise.

Selected item	Description
Standard	Normal adjustment
Fast	For movie image
Slow	For still image
Off	For Game Mode

•3D-Y/C is not selectable depending on the input signal type.

•3D-Y/C may not operate depending on the input signal type or noisy input signal.

Monochrome

For viewing a video in monochrome.

Selected item	Description
On	For viewing in monochrome
Off	Normal color

I/P Setting

Adjusting the image and input signal can give you a more beautiful picture.

1	Press MENU to display the MENU screen, and
	then press c/d to select “Picture”.
2	Press a/b to select “Advanced”, and then
	press ENTER.
3	Press a/b to select “I/P Setting”, and then
	press ENTER.
4	Press a/b to select “Fast” or “Slow”, and
	then press ENTER.
Selected item		Description
Fast		Suitable for fast-moving images
Slow		Suitable for smooth images with low
		amounts of fl ickers

27