CONNECTING OTHER EQUIPMENT
C. Another source connection
This unit can play Dolby Digital, but only in two channels.
Analogue connection
Right side of unit
(Yellow)
(Red)
(White)
(No need to connect | Amplifier of | |
the Yellow video plug) | stereo system, etc. | |
(Red) |
| |
(White) | AUDIO | |
IN | ||
| ||
AUDIO/VIDEO CABLE |
|
AUDIO/VIDEO CABLE (included)
Digital connection
COAXIAL DIGITAL AUDIO CABLE
Audio equipment with digital audio input jack
DIGITAL
OUT
Rear side of unit
Listening to another audio equipment
1.Turn on the Unit.
2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN function.
Notes:
•If the external equipment is a television and this audio system is close to it, you may experience interference if the tuner function is selected while the television is working.
•Make sure to use correct Audio/Video cable, wrong plug connection may cause weak signal.
•If you have a stereo VCR, make sure you set it in stereo mode.
•Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
GB - 12
