General Safety Precautions
The use of any chain saw may be hazardous. At full throttle chain speed can reach 45 mph (20 m/s). It is important that you read; fully understand and observe the following safety precautions and warnings. Read the owner’s manual and the safety instructions periodically.
WARNING !
Reactive forces, including kickback, can be dan- gerous. Careless or improper use of any chain saw may cause serious or fatal injury.
Have your DOLMAR dealer show you how to operate your chain saw. Observe all applicable local safety regulations, standards and ordinances.
1
WARNING!
Minors should never be allowed to use a chain saw. Bystanders, especially children and animals should not be allowed in the area where a chain saw is in use (fig. 1).
Never let the saw run unattended.
Store it in a locked place away from children. Fill the fuel tank to 7/8 th full (see storing the saw). Do not lend your chain saw without this owner’s manual. Be sure that anyone using your saw un- derstands the information given.
Proper use of a chain saw involves
1.the operator
2.the saw
3.the use of the saw.
Discription of symbols used on chain saws:
Z | Compliance with | |||
Z | ||||
CSA | ||||
Class 1A | ||||
|
| |||
|
|
|
| |
ANSI | Compliance with | |||
ANSI | ||||
|
|
| ||
| Chain Saw listed in accordance with | |||
45M6 | American National Standard Safety | |||
Specifications for Gasoline Powered | ||||
® | Chain Saws (ANSI B | |||
| ||||
max. CKA 45O | Maximum Computed Kickback Angle | |
|
| (CKA)* without using the chain brake when |
|
| using the recommended bar and chain |
|
| combinations (In this example the CKA is 45°). |
max. CKA 40O | MaximumComputed Kickback Angle | |
|
| (CKA)* with using the chain brake when |
|
| using the recommended bar and chain |
|
| combinations (In this example the CKA is 40°). |
Contact of the guide bar tip with any object should be avoided! Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury!
| Always use two hands when |
| operating the chain saw! |
| Reduced Kickback Bar and |
| Chain combination that has been |
XXX.YYY.ZZZ | evaluated with the power head |
| to achieve kickback protection |
XXX.YYY.ZZZ | (according to ANSI and CSA |
| standards). |
*The Computed Kickback Angle is a calculated value from energies measured on a test bench.It is not the angle of the guide bar moved upward in case of a
KICKBACK.
The operator
Physical Condition
You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol), which might impair vision, dexterity or judgment.
2
WARNING !
Prolonged use of chain saws exposing the operator to vibrations may produce Whitefinger disease (Raynaud’s phenomenon). This phenomenon reduces the hand’s ability to feel and regulate temperature, produces numbness and burning sensations and may cause nerve and circulation damage and tissue necrosis.
All MAKITA saws are therefore provided with an antivibration system which is essential for those using chain saws on a regular or sustained basis. Antivibration systems do not guarantee that you will not sustain Whitefinger disesase, however, they reduce this danger considerably. Nevertheless, continual and regular users should observe their hands and fingers and in case of any abnormal symptoms, seek medical advice immediately.
5
