Toshiba GA-1140 Enter the default margin width for each item and press SET, Setup, Symbol Set

10 Enter the default margin width for each item and press [SET].

•You can change the unit by pressing either [mm] or [inch].

•The screen returns to the PCL options menu.

11 PCL Setup is completed. Exit the Setting menu and switch to On-line.

P20 “Switching to On-line/Off-line”

		Setting up from TopAccess
1	Accessing the TopAccess for Administrator.
		P23 “Accessing TopAccess for Administrator”
2	Accessing the PCL Setup page.
	1.	Click on the Printer SETUP menu.
	2.	Click on the PCL tab.
3	Set each item explained below and click on
	[SETUP].

Setting up the

Printer Setup

Options

Symbol Set

Select the symbol set that best matches the needs of users printing to the GA-1140.

Font Number

Enter the font number of internal PCL font to be used as a default font for printing. You can check the font numbers and internal PCL fonts in the Internal PCL Font List.

Font Pitch

Enter the font pitch when the selected font number represents a fixed pitch scalable font. Pitch is measured by characters per inch, so 10-pitch type fits ten characters per inch.

85