4 Check the box for “Enable NDS” and “Enable Bindery Server 1 (to 8)”. Then enter each item explained below and click on [SETUP].

The “Enable Bindery Server 1 (to 8)” option allows you to set up to 8 bindery servers to be used for printing. Check the box for this option from 1 to 8 as you requires and you must enter the values for the “File Server” and “Bindery Print Server” options where you check the boxes.

NOTE:

You should also enable the “Enable NDS” option to use the GA-1140 in bindery mode.

File Server

Enter the name of a file server that the print server and print queues for the GA-1140 are created.

Bindery Print Server

Enter the name of the print server that you have created for the GA-1140 on the file server.

Password

Enter the password if it has been set to the print server.

5 The message “Reset the Printer Enable

Setting” is displayed on the top of a page.

Perform resetting the GA-1140.

P125 “Resetting the GA-1140”

The setting changes on the Network options is applied after resetting the printer. If you want to set other network options, you can also proceed the operation for setup before resetting the printer.

58

Page 60
Image 60
Toshiba GA-1140 manual File Server