Toshiba GA-1140 manual Setting up the AppleTalk Options, Accessing the AppleTalk Setup screen

Setting up the AppleTalk Options

: The PS3 Upgrade (GE-1020) or PS3 Scan & HDD Upgrade (GE-1060+GE-1110) is required for setting up the AppleTalk options.

When you use the GA-1140 in the AppleTalk environment for printing from a Mac OS computer, you should enable the AppleTalk.

You can set up the AppleTalk options from Touch Panel Display or TopAccess. However, since setup from the Touch Panel Display is only able to enable the AppleTalk, setup from TopAccess can configure the sever name and AppleTalk zone that the GA-1140 should be connecting. Therefore, it is recommended to configure the AppleTalk options from TopAccess rather than setting up from the Touch Panel Display.

52

Setting up from Touch Panel Display

1	Accessing the Setting menu on the Touch Panel Display.
		P18 “Accessing Setting Menu”
2	Accessing the AppleTalk Setup screen.
	1.	Press [PROTOCOL SETUP] on the Setting menu.
	2.	Press [APPLETALK] on the Protocol Setup menu.

3 To enable the AppleTalk, press [ENABLE] and press [SET].

To disable the AppleTalk, press [DISABLE] and press [SET].

•The screen returns to the Protocol Setup menu.

4 Perform resetting the GA-1140.

P109 “Resetting the GA-1140”

•The setting changes on the Network options is applied after resetting the printer. If you want to set other network options, you can also proceed the operation for setup before resetting the printer.