Setting up from TopAccess

1

Accessing the TopAccess for Administrator.

P23 “Accessing TopAccess for Administrator”

2

Accessing the TCP/IP Setup page.

1. Click on the Network SETUP menu.

 

2. Click on the TCP/IP tab.

3

Check the box for “Enable Ethernet”.

 

When you assign the IP address and subnet

 

mask automatically, check the box for “Enable

 

Auto IP” and select the protocol from the

 

“Select Protocol” drop down menu.

 

To obtain the gateway address from the

 

network, check the box for “Enable Auto IP” at

 

the Gateway options group.

 

When you assign the IP address and subnet

 

mask manually, enter the IP address in the “IP

 

address” field, and enter the subnet mask in

 

the “Subnet mask” field. To assign the

 

gateway address manually, enter the gateway

 

address in the “Gateway Address” field under

 

the Gateway options group.

4

Click on [SETUP] to save settings.

5

The message “Reset the Printer Enable

Setting” is displayed on the top of a page.

Perform resetting the GA-1140.

P125 “Resetting the GA-1140”

• The setting changes on the Network options is applied after resetting the printer. If you want to set other network options, you can also proceed the operation for setup before resetting the printer.

Setting up the

Network Setup

Options

49

Page 51
Image 51
Toshiba GA-1140 Accessing the TCP/IP Setup, Check the box for Enable Ethernet, When you assign the IP address and subnet