78
Duplex
Enables duplex printing (printing on both sides of paper) according to the type of binding for
the duplex-printed pages.
Off - Select this not to perform the duplex printing.
Long Edge Binding - Select this to bind along the long edge side of paper. The direction
to be printed on the back side of the paper differs depending on the orientation.
Short Edge Binding - Select this to bind along the short edge side of paper. The direction
to be printed on the back side of the paper differs depending on the orientation.
1
2
1
2
Portrait Landscape
1
2
1
2
Portrait Landscape
Orientation
This sets the paper printing direction.
Smoothing
Check the box to print the texts and graphics smoothly.
Hole Punch
This selects whether or not to use the punching option. This can not be used in combination
with “Saddle Stitch”, “Sort + Staple Left (Double)”, and “Sort + Staple Top (Double)”. The Hole
Punch unit is required to enable this option.
Off - Select this not to use the punching option.
Left - Select this to create holes on the left side and print.
Top - Select this to create holes on the top side and print.
NOTE: For information about the Emulation Mode option on the Printer Setup page,
please see the next section.
4
The message “Request has been Received” is
displayed on the top of a page.