Setting up the LPD Printing Service

LPD Printing Service Setup enables LPR printing in the TCP/IP network.

In order to enable LPR printing, the GA-1140 should support the LPD protocol (Line Printer Daemon) to receive LPR print jobs and print on the copier.

You can set up the LPD Printing Service options from Touch Panel Display or TopAccess. There are no difference between the setup from Touch Panel Display and setup from TopAccess for LPD Printing Service options.

Setting up from Touch Panel Display

1

Accessing the Setting menu on the Touch Panel Display.

 

P18 “Accessing Setting Menu”

2

Accessing the Windows Setup screen.

1.

Press [PROTOCOL SETUP] on the Setting menu.

 

2.

Press [Windows] on the Protocol Setup menu.

3 Press [Next] twice to display the LPD Printing Service options.

Press [ENABLE] for “Enable LPD Printing Service” and select options for each item explained below and press [SET].

The screen returns to the Protocol Setup menu.

Setting up the

Network Setup

Options

Enable Port 9100

Press [ENABLE] to enable downloading jobs to a GA-1140 queue from LPR printing using the Port 9100. When you enable this option, select a queue at the Select Port 9100 Queue option.

Select Port 9100 Queue

Specify the GA-1140 print queue for downloading jobs to Port 9100. You can only select the direct queue for Port 9100 when the HDD option is not installed.

63

Page 65
Image 65
Toshiba GA-1140 manual Setting up the LPD Printing Service, Enable Port, Select Port 9100 Queue