Setting up from TopAccess

1

Accessing the TopAccess for Administrator.

 

P23 “Accessing TopAccess for Administrator”

2

Accessing the Port Setup page.

1.

Click on the Network SETUP menu.

3

2.

Click on the Port tab.

Modify the options and press [SETUP].

Ignore EOF Character

This option specifies that the GA-1140 should ignore end-of-file (EOF) messages in a file. This option must be enabled to print PostScript files in binary format (not ASCII); under normal circumstances, it should be disabled. When this option is checked, the GA-1140 uses the parallel port timeout value to determine when the end of the file has been reached.

Time out

This option determines how long the GA-1140 waits without receiving data from the parallel port before deciding that the current job is complete. Until the timeout, the GA-1140 cannot receive new jobs through the parallel port, but it can continue to receive network print jobs.

4 The message “Reset the Printer Enable

Setting” is displayed on the top of a page.

Perform resetting the GA-1140.

P125 “Resetting the GA-1140”

The setting changes on the Network options is applied after resetting the printer. If you want to set other network options, you can also proceed the operation for setup before resetting the printer.

Setting up the

Network Setup

Options

45

Page 47
Image 47
Toshiba GA-1140 manual Modify the options and press Setup, Ignore EOF Character