Toshiba GA-1140 - page 55

53
Setting up the Network Setup Options
Setting up from TopAccess
1
Accessing the TopAccess for Administrator.
P23 “Accessing TopAccess for Administrator”
2
Accessing the IPX/SPX Setup page.
1. Click on the Network SETUP menu.
2. Click on the AppleTalk tab.
3
To enable the AppleTalk, check the box for
“Enable AppleTalk”, and select the zone where
the GA-1140 will connect at the “Zone Name”
drop down box.
•Select a zone if the AppleTalk network has a zone.
•In the “Server Name” option, the server name which
is set at the TopAccess options is displayed. If you
want to change the name, set the server name at the
TopAccess options.
To disable the AppleTalk, check off the box for
“Enable AppleTalk”.
Click on [SETUP] to save settings.
4
The message “Reset the Printer Enable
Setting” is displayed on the top of a page.
Perform resetting the GA-1140.
P125 “Resetting the GA-1140”
•The setting changes on the Network options is
applied after resetting the printer. If you want to set
other network options, you can also proceed the
operation for setup before resetting the printer.