Toshiba GA-1140 manual Accessing the IPX/SPX Setup, Auto

4 Perform resetting the GA-1140.

P109 “Resetting the GA-1140”

•The setting changes on the Network options is applied after resetting the printer. If you want to set other network options, you can also proceed the operation for setup before resetting the printer.

		Setting up from TopAccess
1	Accessing the TopAccess for Administrator.
		P23 “Accessing TopAccess for Administrator”
2	Accessing the IPX/SPX Setup page.
	1.	Click on the Network SETUP menu.
	2.	Click on the IPX/SPX tab.

3 Check the box for frame types to be used and press [SETUP].

Setting up the

Network Setup

Options

Auto

Check this to use an appropriate frame type that the GA-1140 finds first.

Ethernet_802.3, Ethernet_802.2, Ethernet_II, Ethernet_SNAP

Instead of “Auto”, check the frame types to be used from these options. The GA-1140 will use all frame types selected here. These can be checked only when “Auto” is checked off.

4 The message “Reset the Printer Enable

Setting” is displayed on the top of a page.

Perform resetting the GA-1140.

P125 “Resetting the GA-1140”

•The setting changes on the Network options is applied after resetting the printer. If you want to set other network options, you can also proceed the operation for setup before resetting the printer.

51