Congratulations to your choice of a Dometic Wine Cellar !
Operating and Installation Instructions for your Dometic Wine Cellar
Introduction
Thank you for choosing the Dometic Wine Cellar. Please read the following instructions carefully before installing your new wine cellar. We trust you will be completely satisfied with your purchase.
The wine cellar must be installed and used according to these instructions in order for it to operate correctly and economically.
Transit damage
Inspect the wine cellar for transit damage. You must report any damage the company responsible for the delivery within the legal or stated time for this type of product. If there is no such established report time, the damage must be reported within seven days of delivery.
Accessories
Please check that the following accessories are attached to the Wine Cellar. On the back or inside the Wine Cellar.
At the back:
1.Distance bar
1
Inside the Wine Cellar:
1. | Instruction manual | 1 |
2.Handle
3.Drip tray
4.Keys
3
4 
2 
Necessary additional tools not incuded
1.Screwdriver (star quad )
2.Adjustable spanner or fixed spanner ( 21mm )
Data plate
Check the data plate, inside the wine cellar at the top left, to ensure you have received the right model. The data plate shows details that you will need to quote if you have to contact service personnel. It is a good idea to make a note of them here.
Model designation ……………………… | .… |
Product number …………………………… | . |
Serial number ……………………………… | . |
Voltage ………………………………… | ....... |
Installation
Please follow these installation instructions:
For best performance, air needs to circulate freely over the cooling unit behind the wine cellar. The free- standing design of the cellar means that it should stand at least 25 mm from the rear and side walls. Allow a clearance of at least 100 mm above the wine cellar. FIG 1
Steel rod
30 mm
FIG. 1
Wall
Steel rod
25
Rear
25
Wall
7
