Adjust the feet of the wine cellar so that it stands in a vertical position in both directions. Use a spirit level if necessary.
FIG 3
FIG 1
1.Remove the transport pallet on which your wine cellar rests.
2.Adjust the feet to allow a 30 mm clearance under the wine cellar. FIG 1
3.Attach the steel rod using the two screws at the top back on each side of the cellar. The rod ensures the correct distance to the wall behind. FIG 2
4.For optimum performance, please place your wine cellar far away from any source of heat (radiator, cooker or intense sunlight).
5.Check that the charcoal filter is in place at the top left corner inside the wine cellar.
6.Fit the door handle to the door. The door frame has
7.Attach the driptray on the back as shown on the pictures FIG 4a , 4b , 4c . The screws are already attached at the back.
FIG 2
FIG 4a | FIG 4b |
FIG 4c
Electrical connection.
It is essential that the electrical installation is carried out correctly, taking into account all relevant regula- tions and codes of practice. Your wine cellar will operate on a
WARNING – THE WINE CELLAR MUST BE EARTHED.
The wine cellar is fitted with a plug intended for an earthed socket. Dometic and its subsidiaries will not be held responsible for any incident due to
Electrical leads must be routed and secured so that they cannot come into contact with hot or sharp parts of the wine cellar.
8
