Auxiliary Remote Truck

Air Conditioning & Heating Systems

Dometic auxiliary remote truck air conditioning systems are designed

to cool or heat the cab and sleeper without running the truck’s diesel engine, saving fuel and preserving the environment. The systems run on 120VAC electricity, which is supplied by a shorepower connection, an auxiliary power unit (APU) or a battery- based system. Models are available in 7,000 BTU/Hr, 10,000 BTU/Hr and 14,000 BTU/Hr capacities. Electrical strip heating options include 1, 1.5, 2, 2.5, 3 and 4 KW, and can be specified as either single or two-stage. It can also be integrated with a diesel fuel heater, using the same Dometic Qt Control/Display.

The system consists of separate inside (evaporator) and outside (condenser) sections connected by flexible refrigerant lines. Designed for the harsh trucking environment, the units are vibration and corrosion resistant, and are backed by more than 40 years of mobile air conditioning experience. A digital thermostat controls the system and is ordered separately. Government-approved environmentally friendly R-417A refrigerant (HFC) is used.

The ACC condenser section has a highly efficient, lightweight, compact all-aluminum condenser and a 24VDC cooling fan within

apowder-coated aluminum housing. To save space and reduce noise, it is mounted outside, typically under the cab.

ID: 2317

The EHC

inside evaporator unit consists of a compressor, evaporator coil, electric heat strip and a blower in an aluminum enclosure with a deep condensate drain pan. A cooling only unit (no heat strip) is also available. This compact unit is designed to be installed under a bunk, or in the bottom of a closet or cabinet. An efficient rotary compressor was selected for its quiet operation, and the enclosure further minimizes noise in the sleeper. A built-in electric heat strip provides heat during cold weather. The strong squirrel-cage blower moves the cooled or heated air to one or more discharge grilles through insulated flexible or fixed ducts.

The condenser, evaporator and lineset are all charged at the factory with the proper amount of refrigerant. Reuseable quick- connect fittings are specified so that no special refrigerant handling equipment is required. Wire harnesses are waterproof and polarized for each plug-and-play installation.

A sleek and attractive cover for the 7,000 BTU Day Cab interior system is available to provide protection to the unit while muffling sound for a more comfortable cab environment. The Dometic Qt Control/ Display can be mounted directly onto the top of the cover, allowing easy access for the driver.

10,000 BTU/hr System shown

Key Benefits

ACC OUTSIDE CONDENSER UNIT

Rugged polished stainless steel enclosure

Designed for corrosion and vibration resistance

24VDC cooling fan

EHC INSIDE EVAPORATOR UNIT

Compact unit

Quiet, powerful squirrel-cage blower

Rotary compressor inside sound shield

Built-in electric heat strip – optional diesel-fired heater

Digital thermostat control (sold separately)

Deep drain pan for condensate removal

Polarized plug-and-play waterproof electrical connections

Refrigerant connections are reuseable quick-connect devices

7,000 BTU Model and Cover P/N 5047656

Page 1
Image 1
Dometic ECEQ10, EHCEQ10, ACCD7, ECEXQ14, ECEQ7*, ACCE10, EHCEQ14, EHCEQ7*, ACCE14 manual Auxiliary Remote Truck, Key Benefits