CERTIFIED INSTALLATION
Certified installations require one roof vent and one lower side vent.
For “Certified Vent System Kits” see page 19.
For further information contact your dealer or distributor.
METHODS OF INSTALLATION
The method of installation is shown in FIG. 9. It is essen- tial that all maximum or minimum dimensions are strictly maintained as the performance of the refrigerator is de- pendent on adequate flow of air over the rear of the re- frigerator.
NOTE: The upper vent should be centered over the condenser coil at the back of the refrigerator.
Ventilation height
Condenser
FIG. 9
LOWER VENT CUTOUT
VENTILATION HEIGHTS
Installation with roof | Minimum ventilation | ||
vent and lower side vent | heights in: |
| |
|
|
| |
Refrigerator | Inches |
| mm |
NDA 1402 |
|
|
|
| 1756 | ||
|
|
|
|
CLEARANCES
Minimum clearances in inches to combustible materials are:
G: | Top | 0 |
K: | Side | 0 |
L: | Bottom | 0 |
M: | Rear | 0 |
N:See NOTE: Clearance “N” below.
NOTE: Clearance “M” is between the rearmost part of the refrigerator and the wall behind the refrigerator.
NOTE: Clearance “N” is the distance between the bot- tom of the lower vent to the roof material. For ventilation height, see table VENTILATION HEIGHTS
See Figures 9, and 10.
G
K
L
FIG. 10
N
K M
NOTE: Wood Strip 
MUST be in place
8
