Dometic NDA1402 manual Start Up Instructions, Set real time clock, Set thermostat range, Minutes

START UP INSTRUCTIONS

1.Press the main power ON/OFF key. If the real time clock has to be set the LED panel will show flashing horizon- tal bars ” ----“.

Set real time clock

PM INDICATION HOURS MINUTES

1.To enter TIME MODE keep SET key pressed until figures flash on the LED panel. Hours are to the left and minutes to the right.

2.Press SET key to adjust to local time. PM or not should also be set here.

3.Store each setting by pressing AUTO/STORE key or use the automatic store function (wait 5 sec.).

Set thermostat range

1.Press SET key to desired thermostat range, 1 to 5 where 5 represent the coldest compartment temperature.

2.Store by pressing AUTO/STORE key or use the automatic store function (wait 5 sec.).

Select energy mode of operation

1.Press AUTO/STORE key to select Auto mode operation or locked up to LP-gas mode operation only. Current mode of operation and energy source, AC or GAS is indicated by a dot on the LED panel.

10