Dometic RM3962 Control panel LED display panel, LED panel indications Status information

refrigerator overview

Control panel

1 2 3

LED display panel

4 3

The LED display panel provides a quick visual indicator of the temperature of the food in the fresh food cabinet, modes of operation, status messages and alarm conditions.

1.ON/OFF button (main power)

Press the button to turn the refrigerator on or off.

2.AUTO/GAS mode selector button

Press the button to turn the AUTO mode on or off.

3.TEMP. SET button

The thermostat has 5 settings where 1 indicates the warmest and 5 the coldest temperature setting. Press the button repeatedly until the desired setting, e.g. 3, is shown in the LED display. This value is shown for about 5 seconds and then the temperature is displayed again, e.g. 43.

LED panel indications				Status information
Display is on				Refrigerator on
Display is off				Refrigerator off
The AUTO				AUTO mode and
indication				AC operation
dot is lit.
The AUTO				AUTO mode and
and LP				GAS operation
indication
dots are lit.
The LP				Manual gas operation
indication				mode.
dot is lit.
Digits	E.g.
				Fresh food temperature.
		4	3
				Thermostat range setting
			3	indication (1 - 5).
				Temporary during setting.
				The thermostat settings
				are stored automatically
				after 5 sec. of inactivity.
Message indications:
				Temperature is above
60 is		6 0		measurement range
displayed.
LP is flashing				Gas operation lock out.
(The message		l P		(Check gas.)
alternates
between LP
and the temperature.)

- -