Installation
4.5Installation recess
The refrigerator must be installed
on. The floor must be substantial enough to bear the weight of the appliance. Ensure that the refrigerator is installed level in the recess.
4.5.1 Recess dimensions
Models
RMD 8501
RMD 8505
RMD 8551
RMD 8555
Height H | Width B | DepthT |
1249 mm | 529 mm | 599 mm |
4.6Securing the refrigerator
In the sidewalls of the refrigerator, there are four plastic sleeves for securing the refrigerator. The sidewalls or strips attached for securing the refrigerator must be prepared to hold the screws firmly in place even when under increased load (while the vehicle is moving). Fastening screws and caps are supplied with the refrigerator.
Fig. 27
CAUTION!
Always insert screws through the sleeves provided as otherwise components laid in foam, such as cables etc., could be dama− ged.
After the refrigerator is put in its final place, secure the screws into the wall of the recess. The screws must penetrate the casing of the refrige− rator.
Fig. 28
15