To Install Front Seat, To Install Canopies

4To Install Front Seat:

Face seat forward and align sockets on seat with brackets on frame. Push down until seat locks with a click.

To attach seat in rear-facing position, press red buttons on sides of seat to release locks, lift seat off brackets.

Rotate seat 180 degrees, align sock- ets with brackets and push down until seat locks with a click.

Front Canopy: Align canopy tabs with sockets in seat sides, push down until locked. Note: Vent in canopy goes toward back of seat as shown.

Rear Canopy: The rear canopy comes partially installed over frame. To com- plete, canopy hinge brackets must be attached to stroller frame.

Snap canopy hinge brackets onto frame just below “armrests”, aligning hole in brackets over pins on frame as shown.

Parent Tray: From front of handle, insert tray between handle frame.

Align holes in tray brackets with pins on each side of frame as shown.

Gently pivot tray down until brackets snap around handle frame.