English
Other
Alarm settings
When the alarm clock is activated will be displayed in the standby mode. Once the alarm clock goes off a tone will be heard for one minute, to switch off the alarm press any button on the telephone.
1.Press and hold v until the alarm setting flashes.
2.Scroll to the required function (off/on/repeat daily) using v/V. Press 0. To cancel the alarm, proceed to point 5.
3.Select the hour
4.Select the minute/s using v/V. Press 0repeatedly to return to standby mode.
5.To cancel the alarm while it is sounding, press 0 or lift and replace the handset.
Connection of additional equipment
On the side of the telephone there is a socket marked 8, this will allow additional telephone equipment i.e. cordless, modems etc to be connected allowing access to the telephone line.
You can reconfigure the phone ports using the switch (1:2) on the underside of the telephone (behind the attached cover), so that the telephone port (1) and the outer port (2) are connected in parallel.
Declaration of conformity
Doro hereby declares that this product, Doro Congress 205, conforms with the essential requirements and other relevant regulations contained in the Directive 1999/5/EC.
A copy of the manufacturer’s declaration is available at www.doro.com/dofc
EN 11
