English
Other
The answering machine is not answering
Memory may be full. Listen to your messages and erase them. Check that the unit is switched on
Check that the telephone cable and the mains adapter are correctly connected
The answering machine does not respond to remote control
Check that the telephone you are using to remotely control the answering machine is a tone dialling telephone.
Some telephones only emit a short tone beep when buttons are pressed, and this may not be enough to activate remote control Use a separate tone transmitter in these cases.
Also try holding the buttons down longer, approximately 1 second per digit.
The base unit/answering machine emits a regular beep tone
The Message Alert feature has been programmed on, to turn this off refer to page 32.
The answering machine does not respond to any commands or button presses
It may be necessary to reset the unit. Disconnect the telephone line and power connections wait for a short time and then
If the telephone still does not work, contact your local Doro Support department or the place of purchase. Don’t forget the receipt or copy of the invoice.
www.doro.com | 39 |