English
Settings
An example of how to use the prefi x function:
The prefi x “9” is preset. When dialling a phone number: “9123456”, the phone
will dial: “9” followed by a pause while the external line is connected, and
then the remaining part of the number: “123456”. It makes no difference if the number is dialled manually or by using speed dialling. Numbers not starting with “9” (in this example) will be dialled as usual, without any pauses.
1.Press w
2.Scroll {/} to SETUP. Press 0
3.Scroll {/} to PABX. Press 0
4Scroll {/} to the required setting (PBX 1 or PBX 2). Press 0
5.Enter the current PIN number (0000 when supplied). Press 0
6.Enter the required prefix using the handset keypad. Press x to erase or make changes.
7.Press 0 to save.
Pause time
Some telephone exchange systems may require a pause in the dialling sequence, normally these settings should not require changing.
1.Press w
2.Scroll {/} to SETUP. Press 0
3.Scroll {/} to PABX. Press 0
4.Scroll {/} to PAUSE. Press 0
5Scroll {/} to the required setting (3 or 5 seconds).
6.Press 0 to save.
Reset handset defaults
An individual handset can be reset to the original factory default condition resulting in loss of memories and all programmed settings, other registered handsets will not be affected.
1.Press w
2.Scroll {/} to SETUP. Press 0
3.Scroll {/} to DEFAULT. Press 0
4.Enter the current PIN number (0000 when supplied).
5.Press 0
www.doro.com | 23 |
