17
(Continued)
2,4
2,4 3
3
■ Preset tuning
You can store up to 40 stations in memory (40 sta-
tions consisting of any combination of AM and FM
stations you like) and recall them.
To enter stations into memory:
1Perform steps 1 - 5 in the "Tuning" section.
2Press the MEMORY button.
MEMORY
MEMORY
3Within 5 seconds, press the PRESET (X or W)
button to make the preset channel n umber flash
in the display.
MEMORY
●Store the stations in memor y, in order, star ting
with preset channel 1.
When is displayed, a station has already been
stored in this preset number memory.
4Within 5 seconds, press the MEMORY button
to store that station in the selected station pre-
set number memory.
MEMORY
MEMORY
●If the "MEMORY" and preset number indicators
go out before the station is memorised, repeat
the operation from step 2.
5Repeat steps 1 - 4 to set other preset stations,
or to change a preset station.
●When a new station is stored in the selected sta-
tion preset number memory, the contents previ-
ously memorised will be erased.
●To store an RDS station in memory , perform steps
2 - 4 whilst the RDS station name is being dis-
played.
1To scan the preset stations, press the PRESET
(X or W) button for more than 0.5 seconds.
●The station preset number will flash and the pro-
grammed stations will be tuned in sequentially,
for 5 seconds each.
2Press the PRESET (X or W) button again to
stop the memory scan at the desired station.
Note:
When the preset memor y does not have any sta-
tions stored in it, the preset memor y scan will not
function.
To erase all memorised stations:
When the unit is in the stand-by mode, hold and
press the TUNER and TUNING X buttons, and then
press the ON/STAND-BY button.
●"PRESET CLR" will appear.
To erase the memorised station:
1Recall the memorised station to erase by press-
ing the PRESET button.
2Press the CLEAR button.
●"MEMORY" and preset number will flash.
3Within 5 seconds, press the MEMORY button.
4Repeat steps 1-3 to erase other memorised sta-
tions.
To recall a memorised station:
Press the PRESET (X or W) button for less than
0.5 seconds to select the desired station.
●"MEMORY" will appear.
●The stations (preset channel number , frequency
and frequency band) which hav e been stored in
memory will appear in the display in numerical
order, irrespective of the frequency bands.
Backup function:
The backup function protects all station presets f or
a few hours should there be a power failure or the
AC power lead is removed from the AC socket.
■ Preset memory scan
The stations saved in the preset memory can be
scanned automatically.
PRESET
(X W)
PRESET
(X W)