Sharp MD-M2H Convenient CD and MD Operation, Apss Auto Program Search System, Cue and review

Load a disc and begin playback.

CONVENIENT CD AND MD OPERATION

■APSS (Auto Program Search System)

APSS automatically locates the beginning of any track.

2 4	5 3
5 3	2 4
06	06

■Repeat and random play

(Remote control operation)

P-MODE

H

06

MD

CD

To listen again to the track being played:

Press the 5 3 button for less than 0.5 seconds during playback.

To move to the beginning of the next track:

Press the 2 4 button for less than 0.5 seconds during playback.

To skip a number of tracks:

Press the 53or 24button repeatedly until the desired track number is shown.

To start playing at a desired track:

Press the 5 3 or 2 4 button whilst in the stop mode to select the track number, and then press the 0 6 button.

1 Select the desired programme source, CD or MD.

2 Press the P-MODE button.

●Each time this button is pressed, the mode will change in the following order:

Repeat indicator Random indicator Disappears

3 Press the 0 6 button to start playback.

■Cue and review

1

2 Hold the 2 4 button down for audible fast forward, and hold the 5 3 button down for audible fast reverse.

3 Normal playback will resume when the 2 4 or 5 3 button is released.

Notes:

●When the beginning of the first track is reached, normal playback will start.

●When the end of the last track is reached, "END" will light, and the unit will pause.

If you want to listen to a portion of a track again, press the 5 3 button to return to the point in the track you want to listen to.

To search very quickly:

When fast forward or fast reverse is used whilst in the pause mode, the playback point will move more quickly than when using audible fast forward or audible fast reverse playback.

●In this mode, no sound is heard. Therefore, you should refer to the time display.

●When you lift your finger, the unit will re-enter the pause mode.

Repeat play

After the last track has been played, playback will return to the first track and begin again.

Random play

When the 0 6 button is pressed, all of the tracks will be played at random, and then playback will stop. (The same track will not be played back twice.)

To cancel repeat or random play:

Press the P-MODE button until the " R " or "RAN- DOM" display disappears.

To repeat playback of selected tracks:

Enter the programme for the tracks you want and start repeat play.

You can programme a single track and play it repeatedly (Refer to page 14).

Notes:

●During APMS play, random play is not possible.

●When random or repeat play is selected during CD or MD playback, random or repeat play will start at that point.

●When using repeat play, be sure to press the ■ button after you have finished listening. Other- wise, the disc will play continuously.

13