Sharp MD-M2H operation manual Recording from the built-in radio onto a MiniDisc

(Continued)

■Recording from the built-in radio onto a MiniDisc

4	2
3

To stop recording:

Press the ■ button.

The recording will stop and the track number will be written on the MiniDisc.

Note:

●It is not possible to pause in the recording mode.

H

5

4

3 5

H

To record the track number whilst record- ing:

The recording is performed as a single track.

To identify different sections of a recording you can increase the track number at any point during the recording process.

To create a new track number, whilst in the record- ing mode, press the ● REC button.

●The track number will increase by one, and then the recording will continue.

1 Tune in to the desired station. (pages 16 - 17.)

2 Load a recordable MiniDisc.

3 Press the ● REC button.

●The unit will enter the recording stand-by mode.

4 Check the recordable time by pressing the DIS- PLAY button.

Note:

●Before recording an AM broadcast, enter the recording stand-by mode, and then separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast can be tuned in most clearly.

●During recording, you cannot change the station.

5 Press the 0 6 button.

31