Sharp MD-M2H operation manual Sleep operation, Simultaneous sleep and timer op- eration

Models: MD-M2H

1 52
Download 52 pages 7.87 Kb
Page 42
Image 42

(Continued)

Caution:

In the following cases, the timer recording function will not work.

When a MiniDisc has not been inserted.

When a playback-only MiniDisc is inserted.

When the MiniDisc you inserted is protected against accidental erasure.

When there is no recording space left on the Mini- Disc you have inserted (when the “TOC FULL ” or “DISC FULL” messages appear).

Sleep operation

The radio, compact disc and MiniDisc can all be turned off automatically.

(Remote control operation)

To cancel the sleep operation:

Press the ON/STAND-BY button to enter the stand- by mode.

The sleep operation can also be cancelled as fol- lows if you can not set the unit to the stand-by mode during recording.

1Press the SLEEP button.

“SLEEP” will flash.

2Within 5 seconds, press the SLEEP button again.

The sleep operation will be cancelled. (“SLEEP” will go out.)

Notes:

Once the sleep time is set, it will remain the same

duration until the setting is changed.

The sleep functions of this unit cannot be used

to control equipment connected to this unit. You

must use the sleep functions of the other equip-

TIMER

/

ment, if it has them.

SLEEP

ENTER

1 Play the desired sound source.

2 Press the SLEEP button.

SLEEP

SLEEP

If you do not need to change the time, the unit will enter the sleep mode automatically.

3 Within 5 seconds, press the ENTER button.

SLEEP

4 Press the or button to adjust the time. (Maximum: 2 hours - Minimum: 1 minute)

The amount of sleep time can also be changed during the sleep operation.

SLEEP

5 Press the ENTER button.

DISC TOC

 

 

TRACK

 

 

MEMORY

 

 

RANDOM

REC

SLEEP

TOTAL

REMAIN

SLEEP

 

 

 

6 The unit will enter the stand-by mode automati- cally after the preset sleep time has elapsed.

Simultaneous sleep and timer op- eration

To use sleep and timer playback in combi- nation:

1Perform steps 1 - 9 on page 39 “Timer playback”.

2Perform steps 1 - 5 of the “Sleep operation” on this page.

To use sleep and timer recording in com- bination:

1Perform steps 1 - 9 on page 40 “Timer record- ing”.

2Perform steps 1 - 5 of the “Sleep operation” on this page.

Sleep timer setting

 

 

Timer playback

Timer playback

 

(record) setting

(record) start

 

1 minute - 2 hours

Desired time

Sleep operation will

End time

automatically stop.

 

41

Page 42
Image 42
Sharp MD-M2H operation manual Sleep operation, Simultaneous sleep and timer op- eration, To cancel the sleep operation