DoubleSight Displays DS-263N Display Controls, User Controls Adjusting the Monitors Display, 4D+1

Display Controls	Display Controls
User Controls	Adjusting the Monitor's Display

A brief description and the location of all LCD Monitor functions controls and indicators

		Figure 2-1
	1	Push to turn ON or turn O￿.
MENU	2	Activates OSD main menu.
EXIT	3	Exit OSD display / DV mode hot key.
SOURCE	4	Select DVI-D / DVI-I (digital) / DVI-I (analog) / D-SUB signal source. (Toggle Switch)
AUTO	5	Hot key for manually auto adjusting the display.
LED	6	Green when the monitor is on, Amber when in power saving mode, and Dark when o￿.
4D+1	7	A four direction key plus enter/exit button. Allows you to move up, down, left, right or
		pressed. See function chart below.

4D+1 Key Function De￿nition

Push key up~

Hot Key: Contrast +

Menu : Cursor Up

Push key left~		Push key right~
Hot Key: Brightness -	Press key center~	Hot Key: Brightness +
Menu: Cursor Left	Item Enter / Exit	Menu: Cursor right
/ Volume -		/ Volume +

Push key down~

Hot Key: Contrast -

Menu: Cursor Down

The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy user-viewing environments.

OSD Function Menu

To activate the OSD Main menu, simply press ”Menu” button , the menu diagram will pop up on the screen as shown on Fig. 2-2

Use the 4D+1 key to navigate through the function you want to adjust. Push the 4D+1 key to enter a sub-menu and adjust the value. Push the 4D+1 key again to exit the sub-menu. Pressing the "Exit" buttons allows you to exit the OSD menu at any time. Pressing the "Menu" key gets you back to the main menu.

Menu under input

Figure 2-2

Attention

Firmware revision may have been updated into a latest version while the version number shown on informati on item in OSD menu will stay as Ver 1

Information OSD

Figure 2-3

6 7